Combined spreader with 4 to 9m³ dry agent capacity and 2000 to 8500 L liquid agent capacity

The SOLID C spreader is specifically designed for combined spreading. In addition to dry and pre-wetted spreading, it also enables liquid spreading due to its construction that allows carrying additional liquid agent tanks. Spreader designs differ depending on the conveyor system for the dry agent (auger, chain or belt conveyor) in combination with liquid spreading.

The control unit and design of the SOLID C spreader enable spreading with dry material, spreading with pre-wetted material with different liquid ratios, liquid spreading via the spinner or liquid spreading using a ramp with nozzles. High precision and efficiency of spreading are enabled by the quality of construction of all spreader components. Unique surface protection guarantees a long lifespan of the device, and it is safe and simple to use.

Main characteristics

Conveyor systems of the spreading agent

Three main versions of SOLID spreaders differ in one key characteristic – the type of system used to transport the spreading agent to the chute spinner. The choice of conveyor systems depends on the type of used spreading material.


The SOLID X is the best choice for spreading with materials such as salt, sand or stone granules with low moisture content. Precision and efficiency of work with SOLID X is enabled by an auger conveyor system.


The spreader is intended for spreading with dry materials of low or moderate humidity. Reliability of spreading is guaranteed by a belt conveyor used for supplying the material.


The spreader is especially designed for work with the most difficult spreading materials, such as wet and adhesive sand with a high percentage of clay, coarse sea salt or a mixture of different materials. High reliability and efficiency of spreading is guaranteed by an especially strong chain conveyor which prevents the formation of a tunnel effect, regardless of the quality of spreading agents.


Simple control and high spreading precision

The operation of all RASCO spreaders is controlled by EPOS control units. Their dedicated development by RASCO experts makes them a leading solution for spreading control and monitoring. EPOS control units are used to control all spreader elements. Control of the spreader’s hydraulic actuators with a system of feedback connections ensures highly precise spreading in all work conditions, while the automated calibration system enables fast and simple calibration of spreading precision. Spreading parameters are not lost when the control unit is turned off and can be automatically activated the next time when the spreading process is started.


All information in real time

ARMS is an information and communication system for control, central monitoring, reporting and optimization of activities related to the maintenance of traffic infrastructure. Monitoring of working hours of people and machines as well as of the used resources (such as the used spreading salt, vehicle fuel etc.) in real time creates a unique possibility to quickly decide on potential saving methods. Unchangeable logs protect the user from liability by providing clear information on any taken action, while the reduced consumption of spreading material at the same time protects traffic infrastructure and its surroundings.


Spreader drive

It can be carried out through built in vehicle hydraulics or a diesel hydraulic power unit mounted on the spreader, or with the fifth wheel.

Mounting of RASCO spreaders on vehicles

Mounting on tipper box

System for mounting the spreader in a tipper box using RO-RO (Roll-On, Roll-Off) legs and rollers on the device itself is the most common and simplest mounting method. The spreader is easily attached to the tipper box by using tension chains or belts.

Mounting on vehicle chassis

Suitable in situations when the vehicle is used exclusively for road maintenance. Different devices, including the spreader, can be easily replaced on the vehicle chassis using specially designed carrying frames.

Mounting on tipper box balls

Fast and simple mounting using the existing sub-chassis of the vehicle tipper box and a special carrying frame on the spreader. The simplest mounting method that enables complete vehicle multifunctionality.

Mounting on trailers

Spreaders are mounted on tractor or truck trailers, thus becoming independent from the towing vehicle.

Mounting on vehicles equipped with hook-lifts

A specially adjusted spreader frame enables simple mounting on vehicles equipped with a system for raising devices using a hook.

Mounting on vehicles equipped with skip loaders

Simple mounting on vehicles equipped with a container lifting system is enabled by special attachment points on the sides of the spreader.



Subscribe to our newsletter