Key benefits

SOLID XF is a low-profile spreader, with a construction adjusted to Unimog vehicles. The spreader design maximally utilizes useful load capacity of the vehicle without compromising visibility of the surroundings from the driver’s seat.

Solid material hopper of SOLID XF is equipped with two auger conveyors which enable uniform tank unloading with the reduced possibility for tunnel effect formation. The XDF spreader version comes with installed bulkhead that separates the hopper into two chambers with a 2:1 ratio. This enables the spreader to operate simultaneously with two types of solid spreading agents. Mounting of a pre-wetting system serves to additionally improve the spreading efficiency of one solid material or a mixture of two solid agents.

Key benefits

Created for unimog

The spreader design maximally utilizes useful load capacity of the vehicle without compromising visibility of the surroundings from the driver’s seat.

Precision

High precision and efficiency of spreading are enabled by the quality of construction of all spreader components and the EPOS control unit which enables the control of all spreading parameters directly from the vehicle cabin.

Durability

Combination of three systems of surface protection secures a long lifespan of the spreader even in the most difficult working conditions.

Simplicity of use

Includes the use of legs for quick mounting and demounting and a frame which can be adjusted for various mounting methods.

Conveyor system

Two auger conveyors for maximum efficiency

Solid material hopper of SOLID XF is equipped with two auger conveyors which enable uniform tank unloading with the reduced possibility for tunnel effect formation. The XDF spreader version comes with installed bulkhead that separates the hopper into two chambers with a 2:1 ratio. This enables the spreader to operate simultaneously with two types of solid spreading agents.

Control

Simple control and high spreading precision

The operation of all RASCO spreaders is controlled by EPOS control units. Their dedicated development by RASCO experts makes them a leading solution for spreading control and monitoring. EPOS control units are used to control all spreader elements. Control of the spreader’s hydraulic actuators with a system of feedback connections ensures highly precise spreading in all work conditions, while the automated calibration system enables fast and simple calibration of spreading precision. Spreading parameters are not lost when the control unit is turned off and can be automatically activated the next time when the spreading process is started.

Tracking

All information in real time

ARMS is an information and communication system for control, central monitoring, reporting and optimization of activities related to the maintenance of traffic infrastructure. Monitoring of working hours of people and machines as well as of the used resources (such as the used spreading salt, vehicle fuel etc.) in real time creates a unique possibility to quickly decide on potential saving methods. Unchangeable logs protect the user from liability by providing clear information on any taken action, while the reduced consumption of spreading material at the same time protects traffic infrastructure and its surroundings.

Drive

Spreader drive

It can be carried out through built in vehicle hydraulics or a diesel hydraulic power unit mounted on the spreader, or with the fifth wheel.

Mounting

Mounting of RASCO spreaders on vehicles

Mounting on tipper box

System for mounting the spreader in a tipper box using RO-RO (Roll-On, Roll-Off) legs and rollers on the device itself is the most common and simplest mounting method. The spreader is easily attached to the tipper box by using tension chains or belts.

Mounting on tipper box balls

Fast and simple mounting using the existing sub-chassis of the vehicle tipper box and a special carrying frame on the spreader. The simplest mounting method that enables complete vehicle multifunctionality.

Rasco dealer locator

Find your local sales and service partner