SOLID XG
Spreader for small municipal vehicles with dry agent capacity from 0,6 to 1,5 m3 and liquid agent capacity from 300 L to 500 L.
Photo & Video Gallery
SOLID XG is a compact dry and wet agent spreader. The dry agent tank volume is from 0,6 to 1,5 m3 and liquid agent tank volume is from 300 L to 500 L. It is specially intended for spreading of narrow roads, pedestrians, parking lots and similar narrow spaces usually inaccessible to larger winter service vehicles.
SOLID XG is mounted on multifuncional municipal vehicles i.e. MUVO, Holder Series C and S and smaller working vehicles.
Key benefits
Compact dimension
SOLID XG is specially intended for spreading of narrow roads, pedestrians, sidewalks, bicycle paths and similar spaces inaccessible to larger trucks or tractors usually used in winter service.
Precision
Spreading precision based on the 30 years of experience and work in over 40 countries around the world, as well as the EPOS control unit which controls all spreading parameters from the vehicle cabin.
Simplicity
Spreader control is simple, intuitive and quick to learn. Installation and removal of the spreader from the vehicle is simple and fast thanks to the mounting systems specially adapted to each type of vehicle on which the spreader is installed.
Minimal maintenance
Main parts of the spreader are constructed for uninterrupted work during the entire winter season, without the need for additional maintenance.
Main characteristics
Conveyor system
Auger conveyor for maximum efficiency
The best choice for spreading with materials such as fine salt with a low moisture content or stone granules. Precision and efficiency of work with SOLID XG is enabled by an auger conveyor system. The auger conveyor has a built-in fragmentation mechanism which prevents the passage of larger lumps of material for dry spreading onto the spinner. Blades located at the end of the auger conveyor prevent the passage of large clumps of material onto the distribution spinner and ensure a uniform dosage of spreading agents.
Control
Simple control and high spreading precision
The work of all RASCO spreaders is controlled by EPOS control units. Their dedicated development by RASCO experts in cooperation with the users makes EPOS control units a leading solution for spreading control and monitoring. The EPOS family of control units is the result of the knowledge and experience gathered in the quarter of century in over 40 markets where RASCO operates. The result is intuitive control units, easy to use, designed for controlling the spreader without taking your eyes off the road. SOLID spreaders can be controlled with EPOS 10 and EPOS 30 control units. EPOS 10 enables control of all spreader functions, and EPOS 30 adds the option of wireless connectivity, GPS automatic sprinkling, navigation, and front and side snow plough control. The high reliability of compliance with the set parameters is achieved by using the system of feedback connections with the spreader’s actuators, and the simple and rapid calibration system of the spreader ensures precision of spreading using different spreading materials.
Tracking
All information in real time
ARMS is an information and communication system for control, central monitoring, reporting and optimization of activities related to the maintenance of traffic infrastructure. Monitoring of working hours of people and machines as well as of the used resources (such as the used spreading salt, vehicle fuel etc.) in real time creates a unique possibility to quickly decide on potential saving methods. Unchangeable logs protect the user from liability by providing clear information on any taken action, while the reduced consumption of spreading material at the same time protects traffic infrastructure and its surroundings.
Power drive
Spreader drive
The spreader is powered using the drive vehicle’s own hydraulic system.
Mounting
Mounting of RASCO spreaders on vehicles
Mounting on tipper box
System for mounting the spreader in a tipper box using RO-RO (Roll-On, Roll-Off) legs and rollers on the device itself is the most common and simplest mounting method. The spreader is easily attached to the tipper box by using tension chains or belts.
Mounting on vehicle chassis
Suitable in situations when the vehicle is used exclusively for road maintenance. Different devices, including the spreader, can be easily replaced on the vehicle chassis using specially designed carrying frames.
Mounting on tipper box balls
Fast and simple mounting using the existing sub-chassis of the vehicle tipper box and a special carrying frame on the spreader. The simplest mounting method that enables complete vehicle multifunctionality.
Mounting on trailers
Spreaders are mounted on tractor or truck trailers, thus becoming independent from the towing vehicle.
Rasco dealer locator